BLANCO BMS607W Manuale Utente Scaricare il pdf (Pagina 21)

21

Cleaning the oven door

For a more complete cleaning of the oven

door it is advisible to proceed by dismantling

it as follows: open the door completely; raise

the small levers fixed to the two hinges and

turn them fully towards the door; reclose the

door until it touches the levers; then, press

the door in the direction of closing and pull it

outwards to remove it. (Fig. 14)

Lay the door down on a flat horizontal

surface; unscrew the screws (A - Fig. 15), lift

slightly up the glass (B - Fig. 15) and remove

it by pulling it forwards.

After having cleaned the door reassemble the

glass (C - Fig. 15) and replace the door as

follows:

1. Clasp the two hinges on either side of the

door together simultaneously.

2. Hook the top hinge into the top slot, so that

the hook is engaged with the roller.

3. Drop the lower hinge into the lower slot,

so that the notch is engaged. Drop the door

down so it is in the horizontal position.

Note:

It is important when carrying out this

operation that both hinges be located

simultaneously.

Fig. 15

The oven door seal

Periodically check the seal around the

opening of the oven to see whether there is

any damage. If damaged, do not use the

equipment before having it repaired, consult

the nearest service centre and use only

original spares. When cleaning the seal do

not use abrasive objects or substances.

Fig. 14

FO 0288

FO 0027

1 2 ... 16 17 18 19 20 21 22 23

Commenti su questo manuale

Nessun commento