BLANCO BOST162X Manuale Utente Scaricare il pdf (Pagina 16)

16

Cleaning the oven door

For a more complete cleaning of the oven

door it is advisible to proceed by dismantling

it as follows: open the door completely; raise

the small levers fixed to the two hinges and

turn them fully towards the door; reclose the

door until it touches the levers; then, press

the door in the direction of closing and pull it

outwards to remove it. (Fig.10)

Lay the door down on a flat horizontal surface.

After having cleaned the door, replace it as

follows:

1. Clasp the two hinges on either side of

the door together simultaneously.

2. Hook the top hinge into the top slot, so

that the hook is engaged with the roller.

3. Drop the lower hinge into the lower slot,

so that the notch is engaged. Drop the

door down so it is in the horizontal

position.

Note:

It is important when carrying out this operation

that both hinges be located simultaneously.

The oven door seal

Periodically check the seal around the

opening of the oven to see whether there is

any damage. If damaged, do not use the

equipment before having it repaired, consult

the nearest service centre and use only

original spares. When cleaning the seal do

not use abrasive objects or substances.

Fig. 10

FO 0288

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commenti su questo manuale

Nessun commento